Accessing the certifier’s menu – Labconco PURICARE Procedure Station Models 34812xx User Manual
Page 11
Page 11 of 197
SECTION ONE –
Background Information
ACCESSING THE CERTIFIER’S MENU
Main Menu
To Choose, OK to
Select, MENU to Escape
1. UV Lamp Operation
2. UV Lamp Timer
3. UV Lamp Maintenance
For More Options
0%
100%
Filter Remaining 90%
Pressing the ‘MENU’ key
will cycle the display
between operation
and menu
Press the or keys
until Option # 6-
‘Calibration’ is
highlighted.
Press ‘OK’.
Cabinet Set up
1. Units of Measure
2. Security Lock
3. Display Options
4. Data Output Rate
5. Restore Defaults
6. Calibration
7. Diagnostic Test
For More Options
To Choose, OK to
Select, MENU to Escape
4. Light Operation
5. Light Timer
6. Light Maintenance
7. Blower Operation
8. Cabinet Set Up
Press the or keys until
Option 8 ‘Cabinet Set Up’ is
highlighted. Press ‘OK’.
The Logic will
now request
the password.
CERTIFIER USE ONLY
Enter Password:
The Password is:
‘Light’
‘UV Light’
‘Timer’
‘Timer’
‘OK’
- PURICARE Procedure Station Models 34810xx PURICARE Procedure Station Models 34802xx PURICARE Procedure Station Models 34800xx Type B2 Biosafety Cabinets Models 34610xx Type B2 Biosafety Cabinets Models 34410xx Type A2 Biosafety Cabinets Models 34609 Type A2 Biosafety Cabinets Models 34509 Type A2 Biosafety Cabinets Models 34409 Type A2 Biosafety Cabinets Models 34309 Type A2 Biosafety Cabinets Models 34608xx Type A2 Biosafety Cabinets Models 34508xx Type A2 Biosafety Cabinets Models 34408xx Type A2 Biosafety Cabinets Models 34308xx Type A2 Biosafety Cabinets Models 34600xx Type A2 Biosafety Cabinets Models 34500xx Type A2 Biosafety Cabinets Models 34400xx Type A2 Biosafety Cabinets Models 34300xx