System reset switch – Labconco PURICARE Procedure Station Models 34812xx User Manual
Page 46
Page 46 of 197
Section 4 -
Initial Operation of the Logic
This section will take you through the steps to begin initial operation of the Logic, with
an explanation the controls, display and options, in order to prepare the unit for its
initial certification.
System Reset Switch
The Purifier has a system reset switch for resetting the unit’s microprocessors. The
switch is located on the front of the electronics module, on top of the unit, as shown in
Figure 4-1. Ensure that the switch is in the on (up) position before attempting to
operate the Logic.
Figure 4-1
The System Reset
switch
This manual is related to the following products:
- PURICARE Procedure Station Models 34810xx PURICARE Procedure Station Models 34802xx PURICARE Procedure Station Models 34800xx Type B2 Biosafety Cabinets Models 34610xx Type B2 Biosafety Cabinets Models 34410xx Type A2 Biosafety Cabinets Models 34609 Type A2 Biosafety Cabinets Models 34509 Type A2 Biosafety Cabinets Models 34409 Type A2 Biosafety Cabinets Models 34309 Type A2 Biosafety Cabinets Models 34608xx Type A2 Biosafety Cabinets Models 34508xx Type A2 Biosafety Cabinets Models 34408xx Type A2 Biosafety Cabinets Models 34308xx Type A2 Biosafety Cabinets Models 34600xx Type A2 Biosafety Cabinets Models 34500xx Type A2 Biosafety Cabinets Models 34400xx Type A2 Biosafety Cabinets Models 34300xx