Labconco PURICARE Procedure Station Models 34812xx User Manual
Page 176

Page 176 of 197
Postfilter Conversion Kit No. 3859300, -01, -
02, -03
NOTE: To prevent damage to the Exhaust HEPA filter, exercise caution when
removing or installing the exhaust filter cover or the postfilter pan.
Installation Procedure
Note: exercise caution when removing or installing the exhaust filter
cover, to prevent damaging the Exhaust HEPA filter.
On Models Manufactured prior to April 2009 –
8. Turn off the Biosafety Cabinet.
9. Remove the exhaust HEPA filter cover by lifting and compressing the
cover until its tabs are clear of the exhaust filter bracket, as shown.
Lift the center of the cover up while
compressing the cover.
Cover tabs in bracket slots
10. This type cover design is not compatible with the postfilter accessory.
Discard this cover and contact Labconco’s Product Service department at
1-800-821-5525 for a replacement redesigned exhaust filter cover.
- PURICARE Procedure Station Models 34810xx PURICARE Procedure Station Models 34802xx PURICARE Procedure Station Models 34800xx Type B2 Biosafety Cabinets Models 34610xx Type B2 Biosafety Cabinets Models 34410xx Type A2 Biosafety Cabinets Models 34609 Type A2 Biosafety Cabinets Models 34509 Type A2 Biosafety Cabinets Models 34409 Type A2 Biosafety Cabinets Models 34309 Type A2 Biosafety Cabinets Models 34608xx Type A2 Biosafety Cabinets Models 34508xx Type A2 Biosafety Cabinets Models 34408xx Type A2 Biosafety Cabinets Models 34308xx Type A2 Biosafety Cabinets Models 34600xx Type A2 Biosafety Cabinets Models 34500xx Type A2 Biosafety Cabinets Models 34400xx Type A2 Biosafety Cabinets Models 34300xx