EXFO FTB-8100 Series Transport Blazer for FTB-200 - Manual (Page 78)

Creating and Starting a Test Case
66 FTB-8100 Series Transport Blazer
Typical Test Cases
4. The test setup has been successfully created.
The DS1 Loopback function is now operational; no need to start the
test. However, the test may be started to monitor the condition of the
DS1 line connection to that test equipment.
5. For additional configuration parameters and results, refer to Summary
Tabs on page 97, Port Tabs on page 113, and DSn Tabs on page 213.
6. For additional configuration parameters and results, refer to the
following chapters: Summary, Port, and DSn tabs.
7. Press the Start button to start the test. Pressing the start button while in
test setup window, will automatically switch to the Alarm summary
tab. Refer to Global Test Status and Controls on page 31 for more
information on test management.