EXFO FTB-8100 Series Transport Blazer for FTB-200 - Manual (Page 38)

Introducing and Using the Graphical User Interface
26 FTB-8100 Series Transport Blazer
Main Window
Main Menu
The main menu gives access to the following main menu items.
³
File gives access to the following controls:
³
New clears the current test. A user’s confirmation is required
before clearing the test. The New button is only available when the
test is created and not running.
³
Open allows setting up the test case by loading a previously saved
configuration. Press Open, select an existing file and press OK to
confirm. The default directory is
\Data\My Documents\SonetSdhAnalyzerG2\Configuration. The
configuration file extension is cfg.
Note: An error message is displayed and the configuration is not loaded when the
file is corrupted, the module is not properly installed, the hardware or
software options are not compatible, invalid configuration
(FTB-8105/15/20/30), or when the resources or power are not sufficient.
Refer to Solving Common Problems on page 401 for more information.
³
Save As saves the current test configuration. The Save As button is
not available while the test is running or when no test is created.
Select an existing file, or type a new name in the File name field
and press OK. The default directory is
\data\My Documents\SonetSdhAnalyzerG2\Configuration.
³
Report generates a report of the current test. Not available on the
FTB-200 v2, refer to Report button from the Global Test Status and
Controls on page 31. See Test Report Generation on page 36 for
more information.
³
About gives information on the company, contact information, and
unit software/hardware information.
Note: Open is not available when the test is running. New, Save As and Report
are only available when the test is created and not running.