EXFO FTB-8100 Series Transport Blazer for FTB-200 - Manual (Page 48)

Introducing and Using the Graphical User Interface
36 FTB-8100 Series Transport Blazer
Test Report Generation
Test Report Generation
Note: For Compact ToolBox, see Under Compact ToolBox on page 38.
Under ToolBox CE
Press Report from the File menu to generate a report for the current test.
Alternatively press the F3 button to access the report window. The report
contains all the information about the test including the job information,
system information, interface setup, test summary, test configuration,
results, etc.
Note: The Report button is not available while the test is running or the
SmartMode alarm scan is running.
Note: Nothing prevents the configuration and alarm/error injection setup while
the test has been stopped; thus, the report should be printed before
changing any test parameters to avoid printing discrepancy between the
configuration and results.
³
Job Information: These parameters are used to identify the source of
the report and are not mandatory. Enter the following job information if
required: Job ID, Contractor, Customer, Operator Name, and
Comment. Up to 256 characters are allowed for each parameter.