beautypg.com

E1/2m tx, Configuration, Alarm generation – EXFO FTB-8100 Series Transport Blazer for FTB-200 User Manual

Page 319

background image

PDH Tabs

SONET/SDH Application

307

E1/2M TX

E1/2M TX

Press Main, Test, DSn/PDH, E1, and E1 TX.

Configuration

Framing: Select the framing that will be used for transmission. Choices are
Unframed, PCM30, PCM30 CRC-4, PCM31, and PCM31 CRC-4. The default
setting is PCM30.

Alarm Generation

Type: Select the type of alarm to be generated. Choices are AIS, RAI, LOF,
RAI MF, LOMF, CRC LOMF, and TS16 AIS. The default setting is AIS.

Note: Only AIS is available when the framing is set to Unframed. CRC LOMF is

available when the framing is set to PCM30 CRC-4 or PCM31 CRC-4.

On/Off button: Press On/Off to enable/disable the alarm generation.