beautypg.com

Ds0/64k rx, Configuration – EXFO FTB-8100 Series Transport Blazer for FTB-200 User Manual

Page 229

background image

DSn Tabs

SONET/SDH Application

217

DS0/64K RX

DS0/64K RX

Press Main, Test, DSn/PDH, DS0, and DS0 RX.

Note: DS0/64K RX configuration is not available when the selected framing from

the DS1/1.5M RX on page 222 is unframed.

Configuration

Note: See DS0/64K RX on page 217 for more information on Enable DS0 and DS0

Mode.

³

Enable: Allows the activation of DS0/64K testing. This setting is
disabled (Off) by default unless otherwise set during the test setup.

³

DS0 Mode: For decoupled test mode, allows the selection of the
channel timeslot data rate. Choices are 56K and 64K. The default
setting is 64K.

56K: A timeslot data rate of 56 Kbps uses 7 bits to carry the payload
information.

64K: A timeslot data rate of 64 Kbps uses 8 bits to carry the payload
information.