EXFO FTB-8100 Series Transport Blazer for FTB-200 - Manual (Page 117)

Summary Tabs
SONET/SDH Application 105
Alarm Summary
³
Test
Global: Indicates the presence of any alarms/errors related to the test
such as Port, OTN, SONET/SDH, DSn/PDH, Pattern, and Other.
Log Full: Indicates that the logger reched it maximum capacity of 500
events.
³
Port: Indicates the presence of any alarms/errors related to the
physical port such as LOS, Frequency, LOC, and Code Errors (for
electrical port: BPV, EXZ, or CV errors). Also indicates the port power
measurement Power (dBm) and Range (dBm) for optical port,
frequency Freq (bps), and Offset (ppm). For Dual RX test case, the
measurement are available for both the Main (test port) and AUX ports.
Refer to Port Tabs on page 113 for more information.
³
OTN: Indicates the presence of any alarms/errors related to the OTN
such as OTU, ODU (includes ODU TCM alarms), and OPU. Refer to
OTN Tabs on page 129 for more information.
³
SONET/SDH: Indicates the presence of any alarms/errors related to
SONET/SDH testing such as Section/RS, Line/MS, HOP (High Order
Path), and LOP (Low Order Path). Refer to SONET Tabs on page 167
and SDH Tabs on page 249 for more information.
³
DSn/PDH: Indicates the presence of any alarms/errors related to
DSn/PDH testing such as DS1/1.5M, DS3/45M, E1/2M, E2/8M, E3/34M,
and E4/140M. Refer to DSn Tabs on page 213 and PDH Tabs on
page 301 for more information.