EVCO EPU2LXP1CH Installer manual - Manual (Page 21)

EVCO S.p.A. c-pro 3 micro CHIL | Application manual ver. 1.0 | Codice 144CP3CHE104
page 21 of 120
7 PARAMETERS LIST
The parameters managed by the application are listed below. Each parameter is accompanied by a brief description, the range of its
admissible values, units of measure, the assigned default value and the menu containing the parameter. Menus are structured on the
basis of the following logic:
Menu code Reference menu Status
OR RTC menu
UT User menu
MA Maintenance menu
MA-F Maintenance menu Operation
MA-M Maintenance menu Manual
MA-C Maintenance menu Calibration
MA-IO Maintenance menu Input/Output
IS Installation menu
IS-C Installation menu Compressors
IS-R Installation menu Regulation
IS-F Installation menu Fans
IS-D Installation menu Defrost
IS-P Installation menu Pumps
IS-AF Installation menu Anti-freeze
IS-FC Installation menu Free-Cooling
IS-S Installation menu Safeties
IS-M Installation menu Modbus
IS-V Installation menu Various
CO Configuration menu
CO-W Configuration menu Configuration
CO-HW Configuration menu Hardware
CO-V Configuration menu EVDRIVE03 circuit 1 and EVDRIVE03 circuit 2