KEYENCE BL-600 Series - Manual (Page 59)

49
Chapter 4 Setup Software
4
4.2.5 [[Code setup]] (Bar code setting) screen
1. Set the type of bar codes, readout digits and other functions.
Type of bar code
Select the type of bar code to be used.
*
If four different types of bar codes are specified in “Code 1” to “Code 4”,
the BL-600 Series can read 4 types of bar codes without changing
settings.
“Code length”
Specify the maximum number of digits for the bar code in “Max=” and the
minimum number of digits in “Min=”.
• For “CODE39”
Specify a value, between 3 and 32, for the number of digits including the
“*” (start/stop character) and a check digit.
• For “ITF”
Specify a value, between 2 and 32, for the number of digits including a
check digit (even numbers only).
• For “(Industrial) 2of5” and “COOP 2of5”
Specify a value, between 1 and 32, for the number of digits including a
check digit.
• For “Codabar”
Specify a value, between 3 and 32, for the number of digits including “a”,
“b”, “c”, “d” (start/stop characters) and a check digit.
• For “UPC/EAN”
A setting for the number of digits is not required. Select whether or not to
enable the reading of each of 13-digit EAN (UPC-A), 8-digit EAN, and
UPC-E.
• For “CODE93”
Specify a value, between 1 and 32, for the number of digits without a
start/stop code and a check digit.
• For “CODE128”
Specify the number of digits without a start/stop code, check digit, FUN1
to 4 (function codes), “SHIFT”, and “CODE-A/B/C”.
The available range varies depending on the type of start code (CODE-A
to C).
• CODE-A/B: 1 to 31 digits
• CODE-C: 1 to 64 digits
Type of bar code
[Options] button
➮ See page 52.
[Details] button
➮ See page 50.
“Code length”