KEYENCE BL-600 Series - Manual (Page 56)

Chapter 4 Setup Software
46
4
4.2.4 [[Comm Settings-2]] (Communication parameters 2) screen
PLC link setting
The settings vary depending on whether or not the PLC link will be used. First,
select whether or not to use the PLC link with “Use PLC”.
If the PLC link is not used
1. Set the following items.
“Handshaking” ➮ See pages 111 and 112.
Select the type of communication forms (communication protocol) to send
the read bar code data from the BL-600 Series to the personal computer.
“Checksum” ➮ See pages 167 and 168.
You can add data to check for incorrect data translation, such as garbled
characters in the serial communication.
“Header”
“Delimiter” ➮ See page 113.
Select the transmission format to send the read bar code data.
If “Custom” is selected, the following text boxes appear. Type the desired
header and delimiter (up to 5 characters) in each box.
“Use PLC”
• If the PLC link is not used:
➮ See page 46.
• If the PLC link is used:
➮ See page 48.
“Checksum”
[Character] button
➮ See page 47.
[Option] button
➮ See page 47.
“Handshaking”
“Header”
“Delimiter”