KEYENCE BL-600 Series - Manual (Page 3)

Warnings and Cautions Specific to the BL-600
• The BL-600 uses a 5 V DC power supply. Using a different voltage level may
damage the unit.
When using the KEYENCE power supply unit BL-U1, BL-U2, N-42 or N-48,
select the voltage level which can be supplied by the power supply unit. If a
nonconforming power supply is connected, the BL-600 may be damaged.
• Before connecting or disconnecting the cable, be sure to turn off any device
connected to the BL-600 Series. Otherwise, the BL-600 Series may be dam-
aged.
• Do not disassemble or modify the BL-600 Series, as this may cause product
failure.
• Locate cables as far as possible from high-voltage lines and power lines.
Otherwise, generated noise may cause product failure or malfunctions.
• The BL-600 is a precision instrument. If the unit is dropped or shocked, it may
be damaged. Take due consideration when transporting or installing the unit.
• Do not hold the cables when carrying the units. The units may hit each other
and become damaged.
CAUTION
Incorrect
Incorrect
ii
96M1127