Aviom Pro64 Network Manager - Manual (Page 69)

60 P
ro
64 N
etwork
M
aNager
U
ser
g
Uide
Input/Output Slot Range Displays
In the Network Overview, a pair of Slot Range columns show the current Slot range for each input‑ and
output‑capable Pro64 device. These are read‑only fields. Slot ranges can be changed from the Device
Window for each I/O device. Slot range information does not apply to network devices such as the MH10,
MH10f, ASI, or RCI.
Valid input and output Slot Range settings (depending on the current sample rate) include:
1‑16 (44.1/ • 48kHz, 88.2/96kHz, and 176.4/192kHz)
17‑32 (44.1/48kHz, and 88.2/96kHz) •
33‑48 44.1/48kHz) •
49‑64 (44.1/48kHz) •
•
Matrixed (44.1/48kHz, 88.2/96kHz, and 176.4/192kHz)
Click the input or output column heading to sort the Network Overview device list by Slot range.
Filtering by Slot Range
The Network Overview can be filtered by Slot range if desired. To filter the list by Slot range, choose F
Ilter
s
ettINgs
... from the View menu. (See page 58.)
Remote Control
The Remote Control column of the Network Overview shows the Control Group setting for any device
capable of using remote control (valid settings are 1‑4 and off). This is a read‑only field.
Comments Field
The Network Overview’s Comments field is a user‑defined text area that is stored with individual Scenes
and with the project. Each Scene can recall a unique set of Comments as needed for an application.
To add a comment, click in the Comments field for any network device. When the text cursor appears
enter text of up to 256 characters. (Comments are not stored in the Pro64 device.)
Enter up to 256 characters in the Comments field.