What’s new in version 3.0, New in version 3.0.2, What’s new in version 3 0 4 – Aviom Pro64 Network Manager User Manual
Page 13: New in version 3.0.3

4
P
ro
64 N
etwork
M
aNager
U
ser
g
Uide
What’s New in Version 3.0
If your system is already running Version 2 of Pro64 Network Manager, the Version 3 release introduces the
following new features and functionality:
Hardware support for the
•
C4dio card for the AllFrame—a firmware update to the
AllFrame F6 is required to allow the cards to be recognized. See page 74.
AllFrame devices now support
•
external clocks (requires at least one C4dio card to be
installed).
External sync via
•
Word Clock and AES3 clocks are supported when a C4dio card is
installed in an AllFrame.
Optional
•
sample rate converters (SRC) are available when a C4dio card is installed in
an AllFrame F6 allowing external devices with digital outputs such as CD players to be
connected to a Pro64 network. See page 75.
The AllFrame Device Window has new features that support C4dio cards installed
•
in the F6 including Sample Rate Converters on/off switches and Audio Clock Source
menu selection options.
•
Standby Mode is now supported for AllFrame devices in the network. See page 77.
Three methods of Standby for AllFrame devices are supported—software based
•
using the Device Window in Pro64 Network Manager, from the AllFrame’s dedicated
front panel Standby momentary switch, and hardware‑based using a contact closure
connected to the Euroblock connector on the top panel of the AllFrame. See page 77.
Use the Firmware Update utility (found in the Tools menu of the main workspace) to update the firmware
in your Pro64 devices to take advantage of the new hardware‑related features.
New in Version 3.0.3
In addition to the Version 3.0 features described above, Version 3.0.2 is a maintenance update that
introduces the following:
Device Windows will no longer show multiple warning messages if resource conflicts
•
exist when attempting to activate multiple Slots using the Activate All Input Channels
command found in the Channel Settings menu. See page 68.
A new Channel Activation Warning window has been added.
•
Network Overview sorting issues have been resolved.
•