Aviom Pro64 Network Manager - Manual (Page 66)

57 P
ro
64 N
etwork
M
aNager
U
ser
g
Uide
In the Numeric ID dialog box enter a number from 1‑999 and then click the ok button to close the dialog
and apply the new ID number.
Enter numbers from 1-999
The Numeric ID is stored in the Pro64 device itself until changed, and retains the setting as new projects
are created and edited.
P N
ote
: Since the Numeric ID is stored in the hardware itself, it is possible to give two Pro64 devices the
same Numeric ID. To avoid confusion when working with a network, it is suggested that each
Pro64 device of the same type be given a unique Numeric ID.
Control Master and Clock Master Indicators
Two special icons are used to indicate the network’s Control Master and Clock Master devices. A red square
icon indicates the Control Master and a yellow square icon is used for the Clock Master.
6416dio #1 is the network’s Control Master and Clock Master.
The Control Master designation for a Pro64 device is set on the hardware itself and cannot be changed
from within Pro64 Network Manager.
Filtering the Network Overview
Pro64 devices displayed in the Network Overview can be filtered from view if desired without affecting
network operations. To filter the list, right‑click anywhere on a device row and select F
Ilter
s
ettINgs
from
the contextual menu, or use the F
Ilter
s
ettINgs
... command from the View menu (shortcut Ctrl+F) to open
the Filter dialog box.
P N
ote
: Filters do not affect the makeup of the Pro64 network or the allocation of network Slot resources.