Aviom Pro64 Network Manager - Manual (Page 52)

43 P
ro
64 N
etwork
M
aNager
U
ser
g
Uide
In this case the project must first be tested to check that it is compatible with the Pro64 network hardware
that it is being connected to. (Remember, the Pro64 device list, Control Master device, and Clock Master
device all must match.)
Choose w
ork
o
NlINe
... from the Network menu to start the transition process. The following illustrates the
options that are available when transitioning from offline to online without having created a project first.
When w
ork
o
NlINe
... is selected from the Network menu, the following dialog box appears:
The transition dialog box
Click c
ANcel
to exit the dialog box and continue working offline.
Click the s
Ave
button to store the current settings to disk as a project. In the Save dialog box, navigate to
an appropriate directory and then name and save the project.
Click D
IscArD to close the project that is currently open without saving changes.
After using the Save or Discard options, the Connect to Network dialog boxes (as described previously) will
appear. The network is now connected online.
If you selected the Save option in the previous dialog box, the project and its settings remain open. Since
the settings from the offline project (channel activation, channel names, I/O routing, etc.) may be different
from the actual settings of the online Pro64 hardware’s front panels, you will be given the opportunity to
choose which settings will be used—those from the offline project or those from the Pro64 hardware.
The following dialog box appears:
The Upload or Send dialog box