Kontron AT8902 Full Size CLI - Manual (Page 89)

AT8901/2/3
Page 2 - 55 AT8901/2/3 CLI Reference Manual
2.12.10 port-channel name
This command defines a name for the port-channel (LAG). The interface is a logical
slot/port for a configured port-channel, and
is an alphanumeric string up to 15
characters.
Format port-channel name {slot/port> | all | }
Mode Global Config
2.12.11 show port-channel brief
This command displays a summary of individual port-channel (LAG) interfaces.
Format
show port-channel brief
Modes Privileged EXEC
User EXEC
For each port-channel the following information is displayed:
Logical Interface Shows the slot/port of the logical interface.
Port-channel Name Shows the name of port-channel (LAG) interface.
Link-State
Shows whether the link is up or down.
Type Shows whether the port-channel is statically or dynamically main-
tained.
Mbr Ports Shows the members of this port-channel
Active Ports Shows ports that are actively participating in the port-channel
2.12.12 show port-channel
This command displays an overview of all port-channels (LAGs) on the switch.
Format
show port-channel {slot/port> | all}
Modes Privileged EXEC
User EXEC
Logical Interface Valid slot and port number separated by forward slashes.
Port-Channel Name The name of this port-channel (LAG). You may enter any string
of up to 15 alphanumeric characters.
Link State Indicates whether the Link is up or down.
Admin Mode May be enabled or disabled. The factory default is enabled.
Link Trap Mode This object determines whether or not to send a trap when link sta-
tus changes. The factory default is enabled.
STP Mode The Spanning Tree Protocol Administrative Mode associated with the
port or port-channel (LAG). The possible values are:
Disable - Spanning tree is disabled for this port.
Enable - Spanning tree is enabled for this port.