Kontron AT8902 Full Size CLI - Manual (Page 73)

AT8901/2/3
Page 2 - 39 AT8901/2/3 CLI Reference Manual
assigned to a specific user if the user is configured locally. If this value is not
configured, users will be authenticated using local authentication only.
Format dot1x defaultlogin
Mode Global Config
2.10.5 dot1x initialize
This command begins the initialization sequence on the specified port. This command
is only valid if the control mode for the specified port is 'auto'. If the control mode is
not 'auto' an error will be returned.
Format
dot1x initialize <
slot/port
>
Mode Privileged EXEC
2.10.6 dot1x login
This command assigns the specified authentication login list to the specified user for
802.1x port security. The
parameter must be a configured user and the
parameter must be a configured authentication login list.
Format
dot1x login
Mode Global Config
2.10.7 dot1x max-req
This command sets the maximum number of times the authenticator state machine on
this port will transmit an EAPOL EAP Request/Identity frame before timing out the
supplicant. The
value must be in the range 1 - 10.
Default 2
Format
dot1x max-req
Mode Interface Config
2.10.7.1 no dot1x max-req
This command sets the maximum number of times the authenticator state machine on
this port will transmit an EAPOL EAP Request/Identity frame before timing out the
supplicant.
Format no dot1x max-req
Mode Interface Config
2.10.8 dot1x port-control
This command sets the authentication mode to use on the specified port. Select
force-
unauthorized to specify that the authenticator PAE unconditionally sets the controlled
port to unauthorized. Select force-authorized to specify that the authenticator PAE
unconditionally sets the controlled port to authorized. Select
auto
to specify that the
authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator and the authentication
server.