Kontron AT8902 Full Size CLI - Manual (Page 100)

AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 2 - 66
2.16.3 port-security max-static
This command sets the maximum number of statically locked MAC addresses allowed
on a specific port.
Default 20
Format port-security max-static
Mode Interface Config
2.16.3.1 no port-security max-static
This command resets the maximum of statically locked MAC addresses allowed on a
specific port to its default value.
Format
no port-security max-static
Mode Interface Config
2.16.4 port-security mac-address
This command adds a MAC address to the list of statically locked MAC addresses. The
is the VLAN ID.
Format port-security mac-address
Mode Interface Config
2.16.4.1 no port-security mac-address
This command removes a MAC address from the list of statically locked MAC
addresses.
Format
no port-security mac-address
Mode Interface Config
2.16.5 port-security mac-address move
This command converts dynamically locked MAC addresses to statically locked
addresses.
Format port-security mac-address move
Mode Interface Config
2.16.6 show port-security
This command displays the port-security settings. If you do not use a parameter, the
command displays the settings for the entire system. Use the optional parameters to
display the settings on a specific interface or on all interfaces.
Format
show port-security [{<slot/port> | all}]
Mode Privileged EXEC
Admin Mode Port Locking mode for the entire system. This field displays if you do
not supply any parameters.
For each interface, or for the interface you specify, the following information appears: