Kontron AT8902 Full Size CLI - Manual (Page 41)

AT8901/2/3
Page 2 - 7 AT8901/2/3 CLI Reference Manual
2.2.3 spanning-tree configuration name
This command sets the Configuration Identifier Name for use in identifying the
configuration that this switch is currently using. The
is a string of up to 32
characters.
Default base MAC address in hexadecimal notation
Format
spanning-tree configuration name
Mode Global Config
2.2.3.1 no spanning-tree configuration name
This command resets the Configuration Identifier Name to its default.
Format
no spanning-tree configuration name
Mode Global Config
2.2.4 spanning-tree configuration revision
This command sets the Configuration Identifier Revision Level for use in identifying
the configuration that this switch is currently using. The Configuration Identifier
Revision Level is a number in the range of 0 to 65535.
Default 0
Format
spanning-tree configuration revision <0-65535>
Mode Global Config
2.2.4.1 no spanning-tree configuration revision
This command sets the Configuration Identifier Revision Level for use in identifying
the configuration that this switch is currently using to the default value.
Format
no spanning-tree configuration revision
Mode Global Config
2.2.5 spanning-tree edgeport
This command specifies that this port is an Edge Port within the common and internal
spanning tree. This allows this port to transition to Forwarding State without delay.
Format
spanning-tree edgeport
Mode Interface Config
2.2.5.1 no spanning-tree edgeport
This command specifies that this port is not an Edge Port within the common and
internal spanning tree.
Format no spanning-tree edgeport
Mode Interface Config