Kontron AT8902 Full Size CLI - Manual (Page 259)

AT8901/2/3 Management Commands
Page 6 - 19 AT8901/2/3 CLI Reference Manual
NOTE: For other port security commands, see 2.6 “Protected Ports Com-
mands” on page 2 - 30.
Default disabled
Format
snmp-server enable traps violation
Mode Interface Config
6.6.9.1 no snmp-server enable traps violation
This command disables the sending of new violation traps.
Format
no snmp-server enable traps violation
Mode Interface Config
6.6.10 snmp-server enable traps
This command enables the Authentication Flag.
Default enabled
Format
snmp-server enable traps
Mode Global Config
6.6.10.1 no snmp-server enable traps
This command disables the Authentication Flag.
Format
no snmp-server enable traps
Mode Global Config
6.6.11 snmp-server enable traps bcaststorm
This command enables the broadcast storm trap. When enabled, broadcast storm traps
are sent only if the broadcast storm recovery mode setting associated with the port is
enabled.
Default enabled
Format
snmp-server enable traps bcaststorm
Mode Global Config
6.6.11.1 no snmp-server enable traps bcaststorm
This command disables the broadcast storm trap. When enabled, broadcast storm traps
are sent only if the broadcast storm recovery mode setting associated with the port is
enabled.
Format
no snmp-server enable traps bcaststorm
Mode Global Config