Kontron AT8902 Full Size CLI - Manual (Page 223)

AT8901/2/3
Page 5 - 27 AT8901/2/3 CLI Reference Manual
5.6.16 copy
The
copy
command uploads and downloads files to and from the switch. You can also
use the copy command to manage the dual images (
image1
and
image2
) on the file sys-
tem. Upload and download files from a server by using TFTP or Xmodem. Format
copy
Mode Privileged EXEC
Replace the and parameters with the options in Table 5.2.
For the source or destination, use one of the following values:
{xmodem | tftp:////}
For TFTP, the parameter is the IP address of the server, is the
path to the file, and is the name of the file you want to upload or
download.
Table 5.2. Copy Parameters
Source Destination Description
nvram:clibanner Copies the CLI banner to a server.
nvram:errorlog Copies the error log file to a server.
nvram:log Copies the log file to a server.
nvram:script
Copies a specified configuration script
file to a server.
nvram:startup-con-
fig Copies the startup configuration to a
server.
nvram:traplog Copies the trap log file to a server.
system:running-
config nvram:startup-
config Saves the running configuration to
nvram.
nvram:clibanner Downloads the CLI banner to the sys-
tem.
nvram:script
Downloads a configuration script file
to the system. During the download of
a configuration script, the copy com-
mand validates the script. In case of
any error, the command lists all the
lines at the end of the validation pro-
cess and prompts you to confirm before
copying the script file.
nvram:sshkey-dsa Downloads an SSH key file. For more
information, see 6.4 “Secure Shell
(SSH) Command” on page 6 - 10.
nvram:sshkey-
rsa1 Downloads an SSH key file.
nvram:sshkey-
rsa2 Downloads an SSH key file.
nvram:sslpem-
dhweak Downloads an HTTP secure-server cer-
tificate.