Kontron AT8902 Full Size CLI - Manual (Page 199)

AT8901/2/3
Page 5 - 3 AT8901/2/3 CLI Reference Manual
5.2.1 download application
This command copies an application tgz from into the flash. The
command checks that the is unique and between 1 and 9
Format
download application
Mode Privileged EXEC
5.2.2 download ipmifw
This command copies an IPMI firmware image from URL and flashes the IPMC with
the new image. If the flash process is interrupted or fails, the IPMC will automatically
recover and use the previously installed image
Format
download ipmifw
Mode Privileged EXEC
5.2.3 download fwum
This command updates the FWUM firmware. It downloads an FWUM firmware image
from URL and flashes the FWUM with the new image. If the flash process is
interrupted or fails, the FWUM will not recover gracefully and the board has to be
repaired manually.
Use this command with extreme care. It is not field safe.
Do not interrupt the upgrade process.
Format
download fwum
Modes Privileged EXEC
5.2.4 download {kernel | initrd}
This command copies a kernel or an initrd tgz from source-url and flash it to A or B
location
Format
download {kernel | initrd} {A | B}
Mode Privileged EXEC
5.2.5 download frudata
This command updates the IPMI FRU data. It downloades a FRU image from
and updates the IPMC with the new FRU data. If the flash process is interrupted or
fails, FRU data may be corrupted and the download process has to be retried until it
finishes successfully.
Format
download frudata
Mode Privileged EXEC
5.2.6 download bootloader
This command loads a bootloader image into the second partition. It downloades a
bootloader image from . This image is used for the next boot process. If the
download fails or the image is not correct (CRC error) the image in the first parttion is
used.