Kontron AT8902 Full Size CLI - Manual (Page 218)

AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 5 - 22
Format
logging port
Mode Global Config
5.5.6.1 no logging port
This command resets the local logging port to the default.
Format no logging port
Mode Global Config
5.5.7 logging syslog
This command enables syslog logging. The parameter is an integer with a
range of 1-65535.
Default disabled
Format
logging syslog [port ]
Mode Global Config
5.5.7.1 no logging syslog
This command disables syslog logging.
Format no logging syslog
Mode Global Config
5.5.8 show logging
This command displays logging configuration information.
Format
show logging
Mode Privileged EXEC
Logging Client Local Port Port on the collector/relay to which syslog messages are
sent.
CLI Command Logging Shows whether CLI Command logging is enabled.
Console Logging Shows whether console logging is enabled.
Console Logging Severity Filter The minimum severity to log to the console log.
Messages with an equal or lower numerical severity are logged.
Buffered Logging Shows whether buffered logging is enabled.
Syslog Logging Shows whether syslog logging is enabled.
Log Messages Received Number of messages received by the log process. This
includes messages that are dropped or ignored.
Log Messages Dropped Number of messages that could not be processed due to error
or lack of resources.
Log Messages Relayed Number of messages sent to the collector/relay.