Kontron AT8902 Full Size CLI - Manual (Page 274)

Management Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 6 - 34
6.10.3 script delete
This command deletes a specified script where the parameter is the
name of the script to delete. The option deletes all the scripts present on the
switch.
Format
script delete { | all}
Mode Privileged EXEC
6.10.4 script list
This command lists all scripts present on the switch as well as the remaining available
space.
Format
script list
Mode Global Config
Configuration Script Name of the script.
Size
Privileged EXEC
6.10.5 script show
This command displays the contents of a script file, which is named .
Format
script show
Mode Privileged EXEC
Output Format
line :
6.10.6 script validate
This command validates a script file by parsing each line in the script file where
is the name of the script to validate.The validate option is intended to be
used as a tool for script development. Validation identifies potential problems. It might
not identify all problems with a given script on any given device.
Format
script validate
Mode Privileged EXEC
6.11 Pre-login Banner and System Prompt Commands
This section describes the commands you use to configure the pre-login banner and the
system prompt. The pre-login banner is the text that displays before you login at the
User:
prompt.
6.11.1 copy (pre-login banner)
The
copy
command includes the option to upload or download the CLI Banner to or
from the switch. You can specify local URLs by using TFTP, Xmodem, Ymodem, or
Zmodem.
Default none