Environmental protection statement, Explanation of symbols – Kontron AT8902 Full Size CLI User Manual
Page 4

Preface
AT8901/2/3
AT8901/2/3 CLI Reference Manual
Page iv
Environmental Protection Statement
This product has been manufactured to satisfy environmental protection requirements where possible. Many of the
components used (structural parts, printed circuit boards, connectors, batteries, etc.) are capable of being recycled.
Final disposition of this product after its service life must be accomplished in accordance with applicable country,
state, or local laws or regulations.
Explanation of Symbols
CE Conformity
This symbol indicates that the product described in this manual is in compliance with all
applied CE standards. Please refer also to the section “Applied Standards” in this manual.
Caution, Electric Shock!
This symbol and title warn of hazards due to electrical shocks (> 60V) when touching prod-
ucts or parts of them. Failure to observe the precautions indicated and/or prescribed by the
law may endanger your life/health and/or result in damage to your material.
Please refer also to the section “High Voltage Safety Instructions” on the following page.
Warning, ESD Sensitive Device!
This symbol and title inform that electronic boards and their components are sensitive to
static electricity. Therefore, care must be taken during all handling operations and inspections
of this product, in order to ensure product integrity at all times.
Please read also the section “Special Handling and Unpacking Instructions” on the following
page.
Warning!
This symbol and title emphasize points which, if not fully understood and taken into consider-
ation by the reader, may endanger your health and/or result in damage to your material.
Note...
This symbol and title emphasize aspects the reader should read through carefully for his or
her own advantage.