4 default-router, 5 dns-server, 6 hardware-address – Kontron AT8902 Full Size CLI User Manual
Page 230: Default-router - 34, Dns-server - 34, Hardware-address - 34

AT8901/2/3
AT8901/2/3 CLI Reference Manual
Page 5 - 34
Default
none
Format
client-name
Mode
DHCP Pool Config
5.9.3.1
no client-name
This command removes the client name.
Format
no client-name
Mode
DHCP Pool Config
5.9.4
default-router
This command specifies the default router list for a DHCP client. {
address1,
address2… address8
} are valid IP addresses, each made up of four decimal bytes
ranging from 0 to 255. IP address 0.0.0.0 is invalid.
Default
none
Format
default-router
Mode
DHCP Pool Config
5.9.4.1
no default-router
This command removes the default router list.
Format
no default-router
Mode
DHCP Pool Config
5.9.5
dns-server
This command specifies the IP servers available to a DHCP client. Address parameters
are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP
address 0.0.0.0 is invalid.
Default
none
Format
dns-server
Mode
DHCP Pool Config
5.9.5.1
no dns-server
This command removes the DNS Server list.
Format
no dns-server
Mode
DHCP Pool Config
5.9.6
hardware-address
This command specifies the hardware address of a DHCP client. Hardware-address is
the MAC address of the hardware platform of the client consisting of 6 bytes in dotted
hexadecimal format. Type indicates the protocol of the hardware platform. It is 1 for 10
MB Ethernet and 6 for IEEE 802.