Kontron AT8902 Full Size CLI - Manual (Page 239)

AT8901/2/3
Page 5 - 43 AT8901/2/3 CLI Reference Manual
You can configure DHCP filtering on physical ports and LAGs. DHCP filtering is not
operable on VLAN interfaces.
5.10.1 ip dhcp filtering
This command enables DHCP filtering globally.
Default disabled
Format ip dhcp filtering
Mode Global Config
5.10.1.1 no ip dhcp filtering
This command disables DHCP filtering.
Format
no ip dhcp filtering
Mode Global Config
5.10.2 ip dhcp filtering trust
This command configures an interface as trusted.
Default untrusted
Format
ip dhcp filtering trust
Mode Interface Config
5.10.2.1 no ip dhcp filtering trust
This command returns an interface to the default value for DHCP filtering.
Format
no ip dhcp filtering trust
Mode Interface Config
5.10.3 show ip dhcp filtering
This command displays the DHCP filtering configuration.
Format
show ip dhcp filtering
Mode Privileged EXEC
Interface Specifies the interface by slot/port.
Trusted Indicates whether the interface is trusted or untrusted.