Kontron AT8902 Full Size CLI - Manual (Page 6)

Preface AT8901/2/3
AT8901/2/3 CLI Reference Manual Page vi
This device should only be installed in or connected to systems that fulfill all necessary technical and specific en-
vironmental requirements. This applies also to the operational temperature range of the specific board version,
which must not be exceeded. If batteries are present their temperature restrictions must be taken into account.
In performing all necessary installation and application operations, please follow only the instructions supplied by
the present manual.
Keep all the original packaging material for future storage or warranty shipments. If it is necessary to store or ship
the board please re-pack it as nearly as possible in the manner in which it was delivered.
Special care is necessary when handling or unpacking the product. Please, consult the special handling and unpack-
ing instruction on the previous page of this manual.
Two Year Warranty
Kontron Modular Computers GmbH grants the original purchaser of Kontron’s products a two year limited hard-
ware warranty as described in the following. However, no other warranties that may be granted or implied by any-
one on behalf of Kontron are valid unless the consumer has the express written consent of Kontron Modular
Computers GmbH.
Kontron Modular Computers GmbH warrants their own products, excluding software, to be free from manufactur-
ing and material defects for a period of 24 consecutive months from the date of purchase. This warranty is not trans-
ferable nor extendible to cover any other users or long-term storage of the product. It does not cover products which
have been modified, altered or repaired by any other party than Kontron Modular Computers GmbH or their au-
thorized agents. Furthermore, any product which has been, or is suspected of being damaged as a result of negli-
gence, improper use, incorrect handling, servicing or maintenance, or which has been damaged as a result of
excessive current/voltage or temperature, or which has had its serial number(s), any other markings or parts thereof
altered, defaced or removed will also be excluded from this warranty.
If the customer’s eligibility for warranty has not been voided, in the event of any claim, he may return the product
at the earliest possible convenience to the original place of purchase, together with a copy of the original document
of purchase, a full description of the application the product is used on and a description of the defect. Pack the
product in such a way as to ensure safe transportation (see our safety instructions).
Kontron provides for repair or replacement of any part, assembly or sub-assembly at their own discretion, or to
refund the original cost of purchase, if appropriate. In the event of repair, refunding or replacement of any part, the
ownership of the removed or replaced parts reverts to Kontron Modular Computers GmbH, and the remaining part
of the original guarantee, or any new guarantee to cover the repaired or replaced items, will be transferred to cover
the new or repaired items. Any extensions to the original guarantee are considered gestures of goodwill, and will
be defined in the “Repair Report” issued by Kontron with the repaired or replaced item.
Kontron Modular Computers GmbH will not accept liability for any further claims resulting directly or indirectly
from any warranty claim, other than the above specified repair, replacement or refunding. In particular, all claims
for damage to any system or process in which the product was employed, or any loss incurred as a result of the
product not functioning at any given time, are excluded. The extent of Kontron Modular Computers GmbH liability
to the customer shall not exceed the original purchase price of the item for which the claim exists.
Kontron Modular Computers GmbH issues no warranty or representation, either explicit or implicit, with respect
to its products’ reliability, fitness, quality, marketability or ability to fulfil any particular application or purpose. As
a result, the products are sold “as is,” and the responsibility to ensure their suitability for any given task remains
that of the purchaser. In no event will Kontron be liable for direct, indirect or consequential damages resulting from
the use of our hardware or software products, or documentation, even if Kontron were advised of the possibility of
such claims prior to the purchase of the product or during any period since the date of its purchase.
Please remember that no Kontron Modular Computers GmbH employee, dealer or agent is authorized to make any
modification or addition to the above specified terms, either verbally or in any other form, written or electronically
transmitted, without the company’s consent.