Kontron AT8902 Full Size CLI - Manual (Page 224)

AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 5 - 28
5.7 Keying for Advanced Features
This section describes the commands you use to enter the licence key to access
advanced features. You cannot access the advanced features without a valid license
key.
5.7.1 license advanced
This command enables a particular feature. This command also enables the
corresponding show commands for a feature.
NOTE: If the feature is enabled, the feature is visible in the output of the
show
running-config
command. The parameter specifies the hexa-
decimal key for the feature.
Default none
Format
license advanced
Mode Privileged EXEC
5.7.1.1 no license advanced
This command disables a particular feature. This command also disables the
corresponding show commands. The
parameter specifies the hexadecimal key
for the feature.
Format no license advanced
Mode Privileged EXEC
nvram:sslpem-
dhstrong Downloads an HTTP secure-server cer-
tificate.
nvram:sslpem-
root Downloads an HTTP secure-server cer-
tificate.
nvram:sslpem-
server Downloads an HTTP secure-server cer-
tificate.
nvram:startup-
config Downloads the startup configuration
file to the system.
nvram:system-
image Downloads a code image to the system.
{image1 |
image2} Download an image from the remote
server to either image.
{image1 | image2} Upload either image to the remote
server.
image1 image2 Copy image1 to image2 .
image2 image1 Copy image2 to image1 .
Table 5.2. Copy Parameters
Source Destination Description