Kontron AT8902 Full Size CLI - Manual (Page 252)

Management Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 6 - 12
6.4.4.1 no sshcon maxsessions
This command sets the maximum number of allowed SSH connection sessions to the
default value.
Format no sshcon maxsessions
Mode Privileged EXEC
6.4.5 sshcon timeout
This command sets the SSH connection session timeout value, in minutes. A session is
active as long as the session has been idle for the value set. The time is a decimal value
from 1 to 160.
Changing the timeout value for active sessions does not become effective until the
session is re accessed. Also, any keystroke activates the new timeout duration.
Default 5
Format
sshcon timeout <1-160>
Mode Privileged EXEC
6.4.5.1 no sshcon timeout
This command sets the SSH connection session timeout value, in minutes, to the
default.
Changing the timeout value for active sessions does not become effective until the
session is re accessed. Also, any keystroke activates the new timeout duration.
Format
no sshcon timeout
Mode Privileged EXEC
6.4.6 show ip ssh
This command displays the ssh settings.
Format
show ip ssh
Mode Privileged EXEC
Administrative Mode This field indicates whether the administrative mode of SSH
is enabled or disabled.
Protocol Level The protocol level may have the values of version 1, version 2 or
both versions 1 and version 2.
Connections This field specifies the current SSH connections.
6.5 User Account Commands
This section describes the commands you use to add, manage, and delete system users.
FASTPATH has two default users: admin and guest. The admin user can view and
configure system settings, and the guest user can view settings.