Kontron AT8902 Full Size CLI - Manual (Page 3)

AT8901/2/3 Preface
Page iii AT8901/2/3 CLI Reference Manual
About This Book
This document describes configuration commands for FASTPATH® software. The commands can be accessed
from the CLI.
Why the Document was Created
This document was created primarily for system administrators configuring and operating a system using FAST-
PATH software. It is intended to provide an understanding of the configuration options of FASTPATH software.
In addition, software engineers who will be integrating FASTPATH software into their router or switch product can
benefit from a description of the configuration options.
It is assumed that the reader has an understanding of the FASTPATH software base and has read the appropriate
specification for the relevant networking device platform. It is also assumed that the reader has a basic knowledge
of Ethernet and networking concepts.
How to Use This Document
Chapter 1 “” details the procedure to quickly become acquainted with the FASTPATH software.
Proprietary Note
This document contains information proprietary to Kontron Modular Computers GmbH. It may not be copied or
transmitted by any means, disclosed to others, or stored in any retrieval system or media without the prior written
consent of Kontron Modular Computers GmbH or one of its authorized agents.
The information contained in this document is, to the best of our knowledge, entirely correct. However, Kontron
Modular Computers GmbH cannot accept liability for any inaccuracies or the consequences thereof, or for any li-
ability arising from the use or application of any circuit, product, or example shown in this document.
Kontron Modular Computers GmbH reserves the right to change, modify, or improve this document or the product
described herein, as seen fit by Kontron Modular Computers GmbH without further notice.
Trademarks
© 2005 LVL7 Systems, Inc. All rights reserved. FASTPATH® and MasterDriver® are registered trademarks, and
LVL7™ and the LVL7 logo are trademarks of LVL7 Systems, Inc. All other trademarks are the property of their
respective owners.
Kontron Modular Computers GmbH and the Kontron Logo are trade marks owned by Kontron Modular Computers
GmbH, Kaufbeuren (Germany). In addition, this document may include names, company logos and trademarks,
which are registered trademarks and, therefore, proprietary to their respective owners.
Note
Refer to the release notes for the FASTPATH application level code. The release notes detail the
platform specific functionality of the Switching, Routing, SNMP, Config, Management, and
Bandwidth Provisioning packages. The suite of features supported by the FASTPATH packages
are not available on all the platforms to which FASTPATH has been ported.