Kontron AT8902 Full Size CLI - Manual (Page 237)

AT8901/2/3
Page 5 - 41 AT8901/2/3 CLI Reference Manual
5.9.25 show ip dhcp global configuration
This command displays address bindings for the specific IP address on the DHCP
server. If no IP address is specified, the bindings corresponding to all the addresses are
displayed.
Format show ip dhcp global configuration
Modes Privileged EXEC
User EXEC
Service DHCP The field to display the status of dhcp protocol.
Number of Ping Packets The maximum number of Ping Packets that will be sent to
verify that an ip address id not already assigned.
Conflict Logging Shows whether conflict logging is enabled or disabled.
BootP Automatic Shows whether BootP for dynamic pools is enabled or disabled.
5.9.26 show ip dhcp pool configuration
This command displays pool configuration. If
all
is specified, configuration for all the
pools is displayed.
Format
show ip dhcp pool configuration { | all}
Modes Privileged EXEC
User EXEC
Pool Name The name of the configured pool.
Pool Type The pool type.
Lease Time The lease expiration time of the IP Address assigned to the client.
DNS Servers The list of DNS servers available to the DHCP client
Default Routers The list of the default routers available to the DHCP client
The following additional field is displayed for Dynamic pool type:
Network The network number and the mask for the DHCP address pool.
The following additional fields are displayed for Manual pool type:
Client Name The name of a DHCP client.
Client Identifier The unique identifier of a DHCP client.
Hardware Address The hardware address of a DHCP client.
Hardware Address Type The protocol of the hardware platform.
Host
The IP address and the mask for a manual binding to a DHCP client.
5.9.27 show ip dhcp server statistics
This command displays DHCP server statistics.
Format show ip dhcp server statistics
Modes Privileged EXEC
User EXEC