Kontron AT8902 Full Size CLI - Manual (Page 77)

AT8901/2/3
Page 2 - 43 AT8901/2/3 CLI Reference Manual
Format
users login
Mode Global Config
2.10.17 show authentication
This command displays the ordered authentication methods for all authentication login
lists.
Format show authentication
Mode Privileged EXEC
Authentication Login List This displays the authentication login listname.
Method 1
This displays the first method in the specified authentication login list,
if any.
Method 2 This displays the second method in the specified authentication login
list, if any.
Method 3 This displays the third method in the specified authentication login
list, if any.
2.10.18 show authentication users
This command displays information about the users assigned to the specified
authentication login list. If the login is assigned to non-configured users, the user
“default” will appear in the user column.
Format
show authentication users
Mode Privileged EXEC
User This field displays the user assigned to the specified authentication
login list.
Component This field displays the component (User or 802.1x) for which the
authentication login list is assigned.
2.10.19 show dot1x
This command is used to show a summary of the global dot1x configuration, summary
information of the dot1x configuration for a specified port or all ports, the detailed
dot1x configuration for a specified port and the dot1x statistics for a specified port -
depending on the tokens used.
Format show dot1x [{summary {< slot/port > | all} | detail < slot/port > |
statistics < slot/port >]
Mode Privileged EXEC
If you do not use any of the optional parameters, the global dot1x configuration
summary is displayed.
Administrative mode Indicates whether authentication control on the switch is
enabled or disabled.
If you use the optional parameter
summary {<
slot/port
> | all}
, the dot1x
configuration for the specified port or all ports are displayed.