3 tacacs-server timeout, 4 key, 5 port – Kontron AT8902 Full Size CLI User Manual
Page 271: Tacacs-server timeout - 31, Key - 31, Port - 31

AT8901/2/3
Management Commands
Page 6 - 31
AT8901/2/3 CLI Reference Manual
authentication and encryption key for all TACACS communications between the
switch and the TACACS+ server. This key must match the key used on the TACACS+
daemon.
Format
tacacs-server key
Mode
Global Config
6.9.2.1
no tacacs-server key
Use the
no tacacs-server key
command to disable the authentication and encryption
key for all TACACS+ communications between the switch and the TACACS+
daemon. The
parameter has a range of 0 - 128 characters This key must
match the key used on the TACACS+ daemon.
Format
no tacacs-server key
Mode
Global Config
6.9.3
tacacs-server timeout
Use the
tacacs-server timeout
command to set the timeout value for
communication with the TACACS+ servers. The
parameter has a range of
1-30 and is the timeout value in seconds.
Default
5
Format
tacacs-server timeout
Mode
Global Config
6.9.3.1
no tacacs-server timeout
Use the
no tacacs-server timeout
command to restore the default timeout value for
all TACACS servers.
Format
no tacacs-server timeout
Mode
Global Config
6.9.4
key
Use the
key
command in TACACS Configuration mode to specify the authentication
and encryption key for all TACACS communications between the device and the
TACACS server. This key must match the key used on the TACACS daemon. The
parameter specifies the key name. For an empty string use “ ”. (Range:
0 - 128 characters).
Format
key
Mode
TACACS Config
6.9.5
port
Use the
port
command in TACACS Configuration mode to specify a server port
number. The server
range is 0 - 65535.
Default
49