Kontron AT8902 Full Size CLI - Manual (Page 236)

AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 5 - 40
5.9.20.1 no ip dhcp conflict logging
This command disables conflict logging on DHCP server.
Format
no ip dhcp conflict logging
Mode Global Config
5.9.21 clear ip dhcp binding
This command deletes an automatic address binding from the DHCP server database.
If “*” is specified, the bindings corresponding to all the addresses are deleted.
is a valid IP address made up of four decimal bytes ranging from 0 to 255.
IP address 0.0.0.0 is invalid.
Default none
Format
clear ip dhcp binding {
Mode Privileged EXEC
5.9.22 clear ip dhcp server statistics
This command clears DHCP server statistics counters.
Format clear ip dhcp server statistics
Mode Privileged EXEC
5.9.23 clear ip dhcp conflict
The command is used to clear an address conflict from the DHCP Server database. The
server detects conflicts using a ping. DHCP server clears all conflicts If the asterisk (*)
character is used as the address parameter.
Default none
Format clear ip dhcp conflict {
Mode Privileged EXEC
5.9.24 show ip dhcp binding
This command displays address bindings for the specific IP address on the DHCP
server. If no IP address is specified, the bindings corresponding to all the addresses are
displayed.
Format
show ip dhcp binding [
Modes Privileged EXEC
User EXEC
IP address The IP address of the client.
Hardware Address The MAC Address or the client identifier.
Lease expiration The lease expiration time of the IP Address assigned to the client.
Type
The manner in which IP Address was assigned to the client.