Kontron AT8902 Full Size CLI - Manual (Page 58)

AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 2 - 24
2.3.20 vlan pvid
This command changes the VLAN ID per interface.
Default 1
Format
vlan pvid <1-4094>
Mode Interface Config
2.3.20.1 no vlan pvid
This command sets the VLAN ID per interface to 1.
Format
no vlan pvid
Mode Interface Config
2.3.21 vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to
enabled. If tagging is enabled, traffic is transmitted as tagged frames. If tagging is
disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN
identification number.
Format vlan tagging <1-4094>
Mode Interface Config
2.3.21.1 no vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to
disabled. If tagging is disabled, traffic is transmitted as untagged frames. The ID is a
valid VLAN identification number.
Format
no vlan tagging <1-4094>
Mode Interface Config
2.3.22 vlan association subnet
This command associates a VLAN to a specific IP-subnet.
Format vlan association subnet
Mode VLAN Config
2.3.22.1 no vlan association subnet
This command removes association of a specific IP-subnet to a VLAN.
Format
no vlan association subnet
Mode VLAN Config
2.3.23 vlan association mac
This command associates a MAC address to a VLAN.
Format
vlan association mac