23 show boardinfo routing, 24 show boardinfo xfp, 5 logging commands – Kontron AT8902 Full Size CLI User Manual
Page 216: 1 logging buffered, 2 logging buffered wrap, 5 logging commands - 20, Logging buffered - 20, Logging buffered wrap - 20

AT8901/2/3
AT8901/2/3 CLI Reference Manual
Page 5 - 20
Mode
Privileged EXEC
5.4.23
show boardinfo routing
This commands shows which interface is configured with Layer 3 functionality. It
shows the currently active setting and the setting which becomes effective after the
next reboot.
Format
show boardinfo routing
Mode
Privileged EXEC
5.4.24
show boardinfo xfp
This command displays information for a specified or all existing XFP’s. The
information are control/status information (via CPLD register) and/or the
eeprom data.
Format
show boardinfo xfp
show boardinfo xfp
show boardinfo xfp all
show boardinfo xfp all {state | eeprom}
Mode
Privileged EXEC
5.5
Logging Commands
This section describes the commands you use to configure system logging, and to view
logs and the logging settings.
5.5.1
logging buffered
This command enables logging to an in-memory log that keeps up to 128 logs.
Default
disabled; critical when enabled
Format
logging buffered
Mode
Global Config
5.5.1.1
no logging buffered
This command disables logging to in-memory log.
Format
no logging buffered
Mode
Global Config
5.5.2
logging buffered wrap
This command enables wrapping of in-memory logging when the log file reaches full
capacity. Otherwise when the log file reaches full capacity, logging stops.
Default
enabled
Format
logging buffered wrap
Mode
Privileged EXEC