Rockwell Automation CHPS-250 Linear Stage Installation - Manual (Page 78)

78 Rockwell Automation Publication CHPS-UM001D-EN-P - July 2014
Appendix A Specifications and Dimensions
Figure 22 - CHPS-A6xxxB/C-xLMxxx
(4X) M6 x 1.0-6H 12.0 (0.47)
25.0
(0.98) 25.0
(0.98)
165
(6.50)
87
(3.42)
Slide
339
(13.35)
167
(6.57)
104.5
(4.11)
(4X) Ø 7.0 (0.28) Thru
Pilot Hole
45.0 (1.80)
130
(5.12)
30.0
(1.18)
123.8
(4.88)
46.8
(1.84)
181.5
(7.15)
238.6
(9.39)
8.5
(0.33)
32.0
(1.26)
92.0
(3.62)
150
(5.9)
7.6
(0.30)
Travel
165
(6.50)
30.5 (1.20)
Mechanical
Overtravel
30.5 (1.20)
Mechanical
Overtravel
120 (4.72)
Toe Clamp/T-Nut Spacing
450.0
(17.71)
Bracket located ±51 (2.0)
from center of travel.
See Detail A (4X) M10 x 1.5-6H Thru (2 per end cap)
Access point for lubricating linear bearings.
Provision to use lifting hooks (not provided).
Detail A
9.3 (0.37)
Depth, max
Toe Clamp is standard for
covered stages. Mount to base
using M6 x1.0 socket cap screw.
T-Nut Mount to base using
M6 x1.0 hardware
(optional accessory).
Ground Screw
M5 x 0.8-6H
+ Travel
Travel Length mm (in.)
Shortest 60 (2.36)
Increments 60 (2.36)
Longest 1560 (61.42)