Rockwell Automation CHPS-250 Linear Stage Installation - Manual (Page 105)

Rockwell Automation Publication CHPS-UM001D-EN-P - July 2014 105
Appendix
E
Mounting Bolts and Torque Values
Table 15 - Recommended Seating Torque for Metric Bolts
Plain Cadmium Plated Zinc
Bolt Size (Metric)
(1)
Pitch N•m (lbf•in) N•m (lbf•in) N•m (lbf•in)
M1.6
(2)
0.35 0.29 (2.6) 0.22 (1.95) 0.41(3.64)
M2
(2)
0.40 0.60 (5.3) 0.45 (3.98) 0.84 (7.42)
M2.5
(2)
0.45 1.24 (11) 0.93 (8.25) 1.74 (15.4)
M3 0.5 2.15 (19) 1.61 (14.25) 3.00 (26.6)
M4 0.7 4.6 (41) 3.47 (30.75) 6.48 (57.4)
M5 0.8 9.6 (85) 7.20 (63.75) 13.4 (119)
M6 1.0 15.8 (140) 11.9 (105) 22.1 (196)
M8 1.25 39.5 (350) 29.7 (262.5) 55.4 (490)
M10 1.5 76.8 (680) 57.6 (510) 115.2 (1020)
(1) Mounting hardware is ISO 898/1 socket head cap bolt that meets or exceeds ANSI B113M, ISO 261, ISO 262 (coarse series only).
(2) Microsize bolt.