Rockwell Automation CHPS-250 Linear Stage Installation - Manual (Page 73)

Rockwell Automation Publication CHPS-UM001D-EN-P - July 2014 73
Specifications and Dimensions Appendix A
General Stage Specifications The following sections contain general specifications.
Accuracy Specification for the CHPS-Series Stage
Commutation Sensor
Limit Sensor Specification
PTC Thermistor Specifications
Cat. No Repeatability Accuracy (1)(2)(3) Straightness and Flatness (3)
μm (in.) μm (in.) μm (in.)
CHPS-xxxxxx-FLMxxx ±1.0 ±3 μm/25 mm NTE ±10 μm/300 mm
(±0.0001 in./1 in. NTE ±0.0004 in./12 in.) ±3 μm/25 mm NTE ±8 μm/300 mm
(±0.0001 in./1 in. NTE ±0.0003 in./12 in.)
CHPS-xxxxxx-GLMxxx ±1.5
CHPS-xxxxxx-HLMxxx ±2.0
CHPS-xxxxxx-ILMxxx Interpolation
Dependent
(1) Non-cumulative. For higher performance or software error mapping, please contact Applications Engineering.
(2) Accuracy specification is based upon a 5 kg test load, measured 35 mm above the center of the slide, fully supported on a granite surface.
(3) Based upon a fully supported and clamped in place unit, mounted on a rigid surface with flatness of 0.012/300 x 300 mm, NTE 0.025 mm overall (0.0004/12 x 12 in., NTE
0.001 in. overall)
Description Specifications
Input Power 5…24V DC, 10 mA max.
Output NPN, open collector, 10 mA max.
Description Specifications
Input Power 12…28V DC, 15 mA max.
Output PNP, open collector, normally closed 50 mA max.sourcing
Temp °C (°F) Resistance (Ohm)
Up To 100 (212) Less than 750
Up To 105 (221) Less than 7500
Up To 110 (230) Greater than 10,000