Rockwell Automation 1755-OF8 GuardPLC Controller Systems - Manual (Page 72)

72 Publication 1753-UM001C-EN-P - March 2010
Chapter 6 Wire 1753-IB16, 1753-OB16, and 1753-IB20XOB8 Modules
Pulse Test Sources
The 1753-IB16 input module is equipped with four pulse test sources
that can be software-configured for pulse testing of safety inputs, if
required. Due to minimal current capacity, these pulse test sources
cannot be used as outputs if they are not configured as pulse test
sources.
For information on configuring pulse test sources for line control, see
Chapter 11 . See Appendix C for example wiring diagrams.
Pulse test sources are connected to these terminals.
ATTENTION
Pulse test sources must not be used as safety-related outputs.
Terminal Number Designation Function
25 L- Reference pole
26 1 Pulse test source 1
27 2 Pulse test source 2
28 3 Pulse test source 3
29 4 Pulse test source 4
30 L- Reference pole
L- 1 L- 2 3 4
25 26 27 28 29 30
25 26 27 28 29 30
PO PULSE TEST