Rockwell Automation 1755-OF8 GuardPLC Controller Systems - Manual (Page 252)

252 Publication 1753-UM001C-EN-P - March 2010
Chapter 20 Use the GuardPLC Controller as a Scanner
4. Assign the signal to the Disable scanner signal in the signal
connections dialog box by dragging and dropping it in the
Signal field.
If this signal is TRUE, scanner functionality on the controller is
disabled. If this signal is FALSE, scanner functionality is enabled.
Configure the EtherNet/IP
Driver 1. Start RSLinx software.
2. Click the Configure Driver button.
3. From the list of Available Driver Types pull-down menu, choose
the Ethernet/IP Driver and click Add New.
4. Enter a name for the new driver and click OK.