Rockwell Automation 1336T PLC Comm. Adapter, Series B, FRN 2.xx-3.xx - Manual (Page 71)

4–5
Publication 1336 FORCE–5.13 –– September, 1998
Communication Command: PLC-5 TYPED READ
PLC-5 Data Table Address: N20:0 Ignore if timed-out: 0 TO
Size in Elements: 10 to be retried: 0 NR
Local/Remote: LOCAL awaiting execution: 0 EW
Remote Station: N/A continuous: 0 CO
Link ID: N/A error: 0 ER
Remote Link Type: N/A message done: 0 DN
Local Node Address: 11 message transmitting: 0 ST
Destination Data Table Address: N10:100 message enabled: 0 EN
control bit addr: N7:0/15
ERROR CODE: 0 (DEC)
BLOCK SIZE = 9 WORDS
Press a function key to change a value.
>[
Rem Prog Forces: None
Data: Formatted 5/10 File Temp
Size in Toggle
Elements Bit
MESSAGE INSTRUCTION DATA MONITOR FOR CONTROL BLOCK N7:0
Rung 2:0
This rung will read parameters 100-109 when bit B3/0 is toggled from zero to one. The parameter information is stored in N20: 0-9 in this PLC. The
drive DH+ station ID is 11.
(EN)
(DN)
(ER)
0
Enable Message Command
to Drive 1
B3
Drive 1
Parameter Read
MSG
SEND/REC MESSAGE
Control Block N7:0