Rockwell Automation 1336T PLC Comm. Adapter, Series B, FRN 2.xx-3.xx - Manual (Page 133)

6–43
Publication 1336 FORCE–5.13 –– September, 1998
432 Channel B RIO Scanner Retries
[ChB RIOS Retries]
ChB RIOS Retries counts the number of
communication retries for all entries in the scan list.
This is only active when RIO scanner mode is
selected for channel B on the DIP switches.
Parameter Number 432
Parameter Type Read, Source
Display Units / Drive Units None
Factory Default 0
Minimum Value 0
Maximum Value 65535
File – Group Communication I/O – Channel B
435 DIP Fault Setup
[DIP Fault Setup]
DIP Fault Setup indicates which DIP switch faults
the PLC Communications Adapter Board has
encountered.
Parameter Number 435
Parameter Type Read Only, Source
Display Units / Drive Units Bits
Factory Default 0000 0000 0000 0000
Minimum Value 0000 0000 0000 0000
Maximum Value 1111 1111 1111 1111
File – Group Diagnostics – Info
Bit 13 Bit 11 Bit 8 Bit 5 Bit 3 Bit 2 Bit 0 Enums Fault
ChA Rack Set ChA Rack Config (Flt 34006)
ChA Redundnt Redund Diff Prot (Flt 34015)
ChA Mod Grp ChA Module Group (Flt 34012)
ChA Dup Node ChA Dup Nodeaddr (Flt 36019)
ChB Rack Set ChB Rack Config (Flt 34007)
ChB Mod Grp ChB Module Group (Flt 34013)
ChB Dup Node ChB Dup Nodeaddr (Flt 36020)
Bits 1, 4, 6, 7, 9, 10, and 12 are not used.
436 Channel A Fault Status
[ChA Fault Sts]
ChA Fault Sts lists the current fault conditions at
channel A of the PLC Communications Adapter
Board. This is only present if channel A is defined to
be either RIO adapter or RIO scanner.
Parameter Number 436
Parameter Type Read Only, Source
Display Units / Drive Units Bits
Factory Default 0
Minimum Value 0
Maximum Value 7 (adapter) or 15 (scanner)
File – Group Diagnostics – Fault Select/Status
Communications I/O – Fault Select/Status
When RIO adapter is used:
Enums
Bit 2 Bit 1 Bit 0 Enums Fault
Res/Pgm/Test ChA Res/Pgm/Test (Flt 36023)
Comm Loss ChA Comm Loss (Flt 36021)
Rack Inhibit Rack Inhibit (Flt 36025)
When RIO scanner is used:
Enums
Bit 3 Bit 2 Bit 1 Bit 0 Enums Fault
Rck Flt Grp0 ChA G0 Rack Flt (Flt 36027)
Rck Flt Grp2 ChA G2 Rack Flt (Flt 36028)
Rck Flt Grp4 ChA G4 Rack Flt (Flt 36029)
Rck Flt Grp6 ChA G6 Rack Flt (Flt 36030)