Lenze 8400 BaseLine D - Manual (Page 166)

9 Parameter reference
9.1 Structure of the parameter descriptions
166
Lenze · 8400 BaseLine D · Reference manual · DMS 5.5 EN · 01/2014 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
9.1.1 Data type
The parameters can be of the following data types:
9.1.2 Parameters with read-only access
Parameters for which the "write access" attribute has not been set, can only be read. They cannot be
changed by the user.
Description structure
Representation in the »Engineer«
The »Engineer« displays these parameters with a grey background or, with an online connection,
with a pale-yellow background:
Data type Meaning
INTEGER_16 16-bit value with sign
INTEGER_32 32-bit value with sign
UNSIGNED_8 8-bit value without sign
UNSIGNED_16 16-bit value without sign
UNSIGNED_32 32-bit value without sign
VISIBLE_STRING String of characters from printable characters
Parameter | Name:
Cxxxxx | _____________
Data type: _______
Index: _______
Description
Display range
(min. value | unit | max. value)
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1