Lenze 8400 BaseLine D - Manual (Page 154)

8 Diagnostics & error management
8.7 Error messages of the operating system
154
Lenze · 8400 BaseLine D · Reference manual · DMS 5.5 EN · 01/2014 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.7.1.2 Error subject area
The error subject area indicates the internal "function unit" of the controller in which the error has
occurred:
8.7.1.3 Error ID
16-bit value (0 ... 65535) for error identification within the error subject area.
Error subject area Assigned errors Remedy possible by
user?
No. Name
111 Supply voltage Errors that occur in connection with the supply voltage of the device. Yes
119 Temperature Errors that occur for temperature reasons. Yes
123 Motor management / encoder Errors that occur within the motor control or encoder evaluation. Yes
125 Analog I/O Errors that occur in connection with the analog inputs and outputs. Yes
144 Parameter set Errors that occur in connection with the parameter set or the parame-
ter set memory (memory module).
Yes if the error relates to a
missing or incompatible
memory module.
145 Device firmware (internal error) Internal error of the device firmware. No
400 Device hardware defective Errors that occur due to defective device hardware. No
980 US01: User error 1 Errors generated by the user (by the application) via the
LS_SetError_1 system block.
Yes
981 US02: User error 2
Bit 16 25 26 31 0 15 29 30
Bit 16 25 26 31 0 15 29 30