Lenze 8400 BaseLine D - Manual (Page 161)

Lenze · 8400 BaseLine D · Reference manual · DMS 5.5 EN · 01/2014 · TD05
161
8 Diagnostics & error management
8.7 Error messages of the operating system
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
dF01: Internal error 01 [xx.0145.00001]
dF02: Internal error 02 [xx.0145.00002]
dF03: Internal error 03 [xx.0145.00003]
dF04: Internal error 04 [xx.0145.00004]
dF05: Internal error 05 [xx.0145.00005]
Response (Lenze setting printed in bold)
 None  Fault  Trouble  WarningLocked
Cause Remedy
Device error • Reduce switching frequency ( C018 ) to 4 kHz.
• If the problem occurs again, you needs to consult Len-
ze.
Response (Lenze setting printed in bold)
 None  Fault  Trouble  WarningLocked
Cause Remedy
Device error • Mains switching or restart of the controller, respec-
tively.
• If the problem occurs again, you needs to consult Len-
ze.
Response (Lenze setting printed in bold)
 None  Fault  Trouble  WarningLocked
Cause Remedy
Device error • Mains switching or restart of the controller, respec-
tively.
• If the problem occurs again, you needs to consult Len-
ze.
Response (Lenze setting printed in bold)
 None  Fault  Trouble  WarningLocked
Cause Remedy
Device error • Mains switching or restart of the controller, respec-
tively.
• If the problem occurs again, you needs to consult Len-
ze.
Response (Lenze setting printed in bold)
 None  Fault  Trouble  WarningLocked
Cause Remedy
Device error • Mains switching or restart of the controller, respec-
tively.
• If the problem occurs again, you needs to consult Len-
ze.