N o t e – ETC Unison Paradigm ACP Configuration Manual v2.1.2 User Manual
Page 74
69
Paradigm Architectural Control Processor Configuration Manual
displayed in the format set in Preferences.
Step 3:
Edit the configured date, start times, end times, actions, and recurrence as
desired.
•
When “Date” is selected for edit, the calendar view displays. Navigate the
calendar and select a new date. Press enter (
) to accept the highlighted
selection.
•
When “Start” or “End” are selected for edit, a menu list displays with a
selection of times the event can take place. Options include “Time of Day”,
“Before Sunrise”, “After Sunrise”, “Before Sunset”, and “After Sunset”. When
“End” is the selected edit, “Duration” also displays as an option for selection.
Navigate to the desired selection and press enter (
).
•
When “Start” or “End” have been selected for edit, and “Time of Day”
was selected, use the button pad to specify a Start Time and End Time
the event should take place. Clock time formats are dependant on the
clock preferences, either 12 hour (indicated by a.m. and p.m.) or 24 hour
clock.
•
If astronomical time was specified, such as “Before Sunrise”, “After
Sunrise”, “Before Sunset”, and “After Sunset”, specify an hours and
minutes offset setting from the specified astronomical time.
•
When “End” is selected for edit and “Duration” is specified, enter the
hours and minutes for the event.
•
Select “Action” for edit to display all available actions that can be assigned
to an event such as control of presets, control channels, groups, walls,
sequences, macros, and overrides. Scroll to select the desired action and
press enter (
).
•
When “Recurrence” is selected, the “Configure Recurrence” menu displays
the default recurrence type of “Once”. Press enter (
) to select a new
recurrence type. The “Recurrence Type” menu list displays.
•
Recurrence types include once (default), hourly, daily, weekly, monthly,
yearly, holiday, custom dates, or none. Scroll to select the desired
recurrence type and press enter (
).
•
Depending on the selection, additional menu lists may display for
selection. For example, when “Weekly” is selected, you may choose
specific days of the week for the event recurrence.
Step 4:
After all edits to fields are complete, press back ( ) for options to save or discard
edits.
N o t e :
Once an event has been created or edited, all parameters must be applied at once
to the configuration when exiting the “Add New Event” or “View/Edit Events”
display.
N o t e :
Selecting “holiday” from the “Recurrence Type” menu list displays only the
holidays that have been included in the LightDesigner configuration. The addition
of new holidays is only possible with LightDesigner.
Attention:
Changes made must
be applied to the
Configuration
to take effect.
Save Changes and Exit
Discard and Exit
Cancel